Tak s největší pravděpodobností se bude jednat o nekompatibilní nové ram moduly corsair, které vadně komunikují s hynixema.
Při vyndaných corsairech se problém neobjevuje.
Rád bych se vás, pánové, zeptal jaké mi doporučíte řešení... Zkusit update biosu, prohodit nové/staré moduly?
Koukněte prosím ještě na log z HWinfo:
Kód: Vybrat vše
Row: 0 - 2048 MB PC3-10600 DDR3 SDRAM Corsair CMSO2GX3M1A1333C9 -----------
[General Module Information]
Module Number: 0
Module Size: 2048 MBytes
Memory Type: DDR3 SDRAM
Module Type: SO-DIMM
Memory Speed: 666.7 MHz (PC3-10600)
Module Manufacturer: Corsair
Module Part Number: CMSO2GX3M1A1333C9
Module Revision: 0
Module Serial Number: 0
Module Manufacturing Date: Year: 2000, Week: 0
Module Manufacturing Location: 1
SDRAM Manufacturer: Unknown
Error Check/Correction: None
[Module characteristics]
Row Address Bits: 15
Column Address Bits: 10
Number Of Banks: 8
Module Density: 2048 Mb
Number Of Ranks: 1
Device Width: 8 bits
Bus Width: 64 bits
Module Nominal Voltage (VDD): 1.5 V
[Module timing]
Minimum SDRAM Cycle Time (tCKmin): 1.500 ns
CAS# Latencies Supported: 6, 8, 9
Minimum CAS# Latency Time (tAAmin): 13.500 ns
Minimum RAS# to CAS# Delay (tRCDmin): 13.500 ns
Minimum Row Precharge Time (tRPmin): 13.500 ns
Minimum Active to Precharge Time (tRASmin): 36.000 ns
Supported Module Timing at 666.7 MHz: 9-9-9-24
Supported Module Timing at 600.0 MHz: 9-9-9-22
Supported Module Timing at 533.3 MHz: 8-8-8-20
Supported Module Timing at 400.0 MHz: 6-6-6-15
Minimum Write Recovery Time (tWRmin): 15.000 ns
Minimum Row Active to Row Active Delay (tRRDmin): 7.500 ns
Minimum Active to Active/Refresh Time (tRCmin): 50.625 ns
Minimum Refresh Recovery Time Delay (tRFCmin): 160.000 ns
Minimum Internal Write to Read Command Delay (tWTRmin): 7.500 ns
Minimum Internal Read to Precharge Command Delay (tRTPmin): 7.500 ns
Minimum Four Activate Window Delay Time (tFAWmin): 37.500 ns
[Features]
On-die Thermal Sensor (ODTS) Readout: Not Supported
Auto Self Refresh (ASR): Not Supported
Extended Temperature Refresh Rate: Not Supported
Extended Temperature Range: Supported
Module Temperature Sensor: Not Supported
Module Nominal Height: 30 - 31 mm
Module Maximum Thickness (Front): 1 - 2 mm
Module Maximum Thickness (Back): 1 - 2 mm
Row: 1 - 2048 MB PC3-10600 DDR3 SDRAM Corsair CMSO2GX3M1A1333C9 -----------
[General Module Information]
Module Number: 1
Module Size: 2048 MBytes
Memory Type: DDR3 SDRAM
Module Type: SO-DIMM
Memory Speed: 666.7 MHz (PC3-10600)
Module Manufacturer: Corsair
Module Part Number: CMSO2GX3M1A1333C9
Module Revision: 0
Module Serial Number: 0
Module Manufacturing Date: Year: 2000, Week: 0
Module Manufacturing Location: 1
SDRAM Manufacturer: Unknown
Error Check/Correction: None
[Module characteristics]
Row Address Bits: 15
Column Address Bits: 10
Number Of Banks: 8
Module Density: 2048 Mb
Number Of Ranks: 1
Device Width: 8 bits
Bus Width: 64 bits
Module Nominal Voltage (VDD): 1.5 V
[Module timing]
Minimum SDRAM Cycle Time (tCKmin): 1.500 ns
CAS# Latencies Supported: 6, 8, 9
Minimum CAS# Latency Time (tAAmin): 13.500 ns
Minimum RAS# to CAS# Delay (tRCDmin): 13.500 ns
Minimum Row Precharge Time (tRPmin): 13.500 ns
Minimum Active to Precharge Time (tRASmin): 36.000 ns
Supported Module Timing at 666.7 MHz: 9-9-9-24
Supported Module Timing at 600.0 MHz: 9-9-9-22
Supported Module Timing at 533.3 MHz: 8-8-8-20
Supported Module Timing at 400.0 MHz: 6-6-6-15
Minimum Write Recovery Time (tWRmin): 15.000 ns
Minimum Row Active to Row Active Delay (tRRDmin): 7.500 ns
Minimum Active to Active/Refresh Time (tRCmin): 50.625 ns
Minimum Refresh Recovery Time Delay (tRFCmin): 160.000 ns
Minimum Internal Write to Read Command Delay (tWTRmin): 7.500 ns
Minimum Internal Read to Precharge Command Delay (tRTPmin): 7.500 ns
Minimum Four Activate Window Delay Time (tFAWmin): 37.500 ns
[Features]
On-die Thermal Sensor (ODTS) Readout: Not Supported
Auto Self Refresh (ASR): Not Supported
Extended Temperature Refresh Rate: Not Supported
Extended Temperature Range: Supported
Module Temperature Sensor: Not Supported
Module Nominal Height: 30 - 31 mm
Module Maximum Thickness (Front): 1 - 2 mm
Module Maximum Thickness (Back): 1 - 2 mm
Row: 2 - 2048 MB PC3-10600 DDR3 SDRAM Hynix (Hyundai) HMT325S6BFR8C-H9 ----
[General Module Information]
Module Number: 2
Module Size: 2048 MBytes
Memory Type: DDR3 SDRAM
Module Type: SO-DIMM
Memory Speed: 666.7 MHz (PC3-10600)
Module Manufacturer: Hynix (Hyundai)
Module Part Number: HMT325S6BFR8C-H9
Module Revision: 12366
Module Serial Number: 3403792415
Module Manufacturing Date: Year: 2010, Week: 42
Module Manufacturing Location: 1
SDRAM Manufacturer: Hynix (Hyundai)
Error Check/Correction: None
[Module characteristics]
Row Address Bits: 15
Column Address Bits: 10
Number Of Banks: 8
Module Density: 2048 Mb
Number Of Ranks: 1
Device Width: 8 bits
Bus Width: 64 bits
Module Nominal Voltage (VDD): 1.5 V
[Module timing]
Minimum SDRAM Cycle Time (tCKmin): 1.500 ns
CAS# Latencies Supported: 5, 6, 7, 8, 9
Minimum CAS# Latency Time (tAAmin): 13.125 ns
Minimum RAS# to CAS# Delay (tRCDmin): 13.125 ns
Minimum Row Precharge Time (tRPmin): 13.125 ns
Minimum Active to Precharge Time (tRASmin): 36.000 ns
Supported Module Timing at 666.7 MHz: 9-9-9-24
Supported Module Timing at 600.0 MHz: 8-8-8-22
Supported Module Timing at 533.3 MHz: 7-7-7-20
Supported Module Timing at 480.0 MHz: 7-7-7-18
Supported Module Timing at 400.0 MHz: 6-6-6-15
Supported Module Timing at 333.3 MHz: 5-5-5-12
Minimum Write Recovery Time (tWRmin): 15.000 ns
Minimum Row Active to Row Active Delay (tRRDmin): 6.000 ns
Minimum Active to Active/Refresh Time (tRCmin): 49.125 ns
Minimum Refresh Recovery Time Delay (tRFCmin): 160.000 ns
Minimum Internal Write to Read Command Delay (tWTRmin): 7.500 ns
Minimum Internal Read to Precharge Command Delay (tRTPmin): 7.500 ns
Minimum Four Activate Window Delay Time (tFAWmin): 30.000 ns
[Features]
On-die Thermal Sensor (ODTS) Readout: Not Supported
Auto Self Refresh (ASR): Supported
Extended Temperature Refresh Rate: Not Supported
Extended Temperature Range: Supported
Module Temperature Sensor: Not Supported
Module Nominal Height: 29 - 30 mm
Module Maximum Thickness (Front): 1 - 2 mm
Module Maximum Thickness (Back): 1 - 2 mm
Row: 3 - 2048 MB PC3-10600 DDR3 SDRAM Hynix (Hyundai) HMT325S6BFR8C-H9 ----
[General Module Information]
Module Number: 3
Module Size: 2048 MBytes
Memory Type: DDR3 SDRAM
Module Type: SO-DIMM
Memory Speed: 666.7 MHz (PC3-10600)
Module Manufacturer: Hynix (Hyundai)
Module Part Number: HMT325S6BFR8C-H9
Module Revision: 12366
Module Serial Number: 1088557087
Module Manufacturing Date: Year: 2010, Week: 42
Module Manufacturing Location: 1
SDRAM Manufacturer: Hynix (Hyundai)
Error Check/Correction: None
[Module characteristics]
Row Address Bits: 15
Column Address Bits: 10
Number Of Banks: 8
Module Density: 2048 Mb
Number Of Ranks: 1
Device Width: 8 bits
Bus Width: 64 bits
Module Nominal Voltage (VDD): 1.5 V
[Module timing]
Minimum SDRAM Cycle Time (tCKmin): 1.500 ns
CAS# Latencies Supported: 5, 6, 7, 8, 9
Minimum CAS# Latency Time (tAAmin): 13.125 ns
Minimum RAS# to CAS# Delay (tRCDmin): 13.125 ns
Minimum Row Precharge Time (tRPmin): 13.125 ns
Minimum Active to Precharge Time (tRASmin): 36.000 ns
Supported Module Timing at 666.7 MHz: 9-9-9-24
Supported Module Timing at 600.0 MHz: 8-8-8-22
Supported Module Timing at 533.3 MHz: 7-7-7-20
Supported Module Timing at 480.0 MHz: 7-7-7-18
Supported Module Timing at 400.0 MHz: 6-6-6-15
Supported Module Timing at 333.3 MHz: 5-5-5-12
Minimum Write Recovery Time (tWRmin): 15.000 ns
Minimum Row Active to Row Active Delay (tRRDmin): 6.000 ns
Minimum Active to Active/Refresh Time (tRCmin): 49.125 ns
Minimum Refresh Recovery Time Delay (tRFCmin): 160.000 ns
Minimum Internal Write to Read Command Delay (tWTRmin): 7.500 ns
Minimum Internal Read to Precharge Command Delay (tRTPmin): 7.500 ns
Minimum Four Activate Window Delay Time (tFAWmin): 30.000 ns
[Features]
On-die Thermal Sensor (ODTS) Readout: Not Supported
Auto Self Refresh (ASR): Supported
Extended Temperature Refresh Rate: Not Supported
Extended Temperature Range: Supported
Module Temperature Sensor: Not Supported
Module Nominal Height: 29 - 30 mm
Module Maximum Thickness (Front): 1 - 2 mm
Module Maximum Thickness (Back): 1 - 2 mm