Po zapnutí PC nejde net - log z combofixu

Máte problém s virem? Vložte sem log z FRST nebo RSIT.

Moderátor: Moderátoři

Pravidla fóra
Pokud chcete pomoc, vložte log z FRST [návod zde] nebo RSIT [návod zde]

Jednotlivé thready budou po vyřešení uzamčeny. Stejně tak ty, které budou nečinné déle než 14 dní. Vizte Pravidlo o zamykání témat. Děkujeme za pochopení.

!NOVINKA!
Nově lze využívat služby vzdálené pomoci, kdy se k vašemu počítači připojí odborník a bližší informace o problému si od vás získá telefonicky! Více na www.neslape.cz


Vážení uživaterlé!
Ve dnech 4. - 6-9.2026 budou někteříí naši členové na každoročním srazu fóra. Žádáme vás, abyste měli strpení, nemusí se na na řešení vašeho problému dostat hned. Děkujeme za pochopení.
Zpráva
Autor
zoldak21
Návštěvník
Návštěvník
Příspěvky: 42
Registrován: 16 Lis 2012 18:34

Re: Po zapnutí PC nejde net - log z combofixu

#46 Příspěvek od zoldak21 »

Zdravím,
odstranění ESETu bylo zkoušeno, ale zkusím to ještě jednou radši, hned jak přijedu zítra ze školy odpoledne.
Návod jsem si hodil do wordu a postahoval programy a jak nepůjde net, ihned to zkusím. Jenom koukal jsem, že to tam píše někdy, že je to pro XP, mám Win7, nebude to problém?

zoldak21
Návštěvník
Návštěvník
Příspěvky: 42
Registrován: 16 Lis 2012 18:34

Re: Po zapnutí PC nejde net - log z combofixu

#47 Příspěvek od zoldak21 »

Ok, včera jsem PC nezapínal já tak nevím, dnes net naběhl. Tak čekám, kdy nenaběhne a hned vyzkouším a dám vědět.

zoldak21
Návštěvník
Návštěvník
Příspěvky: 42
Registrován: 16 Lis 2012 18:34

Re: Po zapnutí PC nejde net - log z combofixu

#48 Příspěvek od zoldak21 »

Chápu, no dnes net nešel. Takže vyzkoušeno.
1 návod nepomohl
log je tady:
Log Opened: 2013-01-05 @ 13:21:21
13:21:21 - -----------------
13:21:21 - | Begin Logging |
13:21:21 - -----------------
13:21:21 - Fix started on a WIN_7 X64 computer
13:21:21 - Prep in progress. Please Wait.
13:21:23 - Prep complete
13:21:23 - Repairing Services Now. Please wait...
INFO: The restore action ignores the object name parameter (paths are read from the backup file). However, other actions that require the object name may be combined with -restore.
INFORMATION: Input file for restore operation opened: '.\Win7\BFE.sddl'
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\BFE\Parameters\Policy\Persistent\SubLayer>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\BFE\Parameters\Policy\Persistent\Provider>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\BFE\Parameters\Policy\Persistent\Filter>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\BFE\Parameters\Policy\Persistent>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\BFE\Parameters\Policy\BootTime\Filter>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\BFE\Parameters\Policy\BootTime>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\BFE\Parameters\Policy>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\BFE\Parameters>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\BFE>

SetACL finished successfully.
INFO: The restore action ignores the object name parameter (paths are read from the backup file). However, other actions that require the object name may be combined with -restore.
INFORMATION: Input file for restore operation opened: '.\Win7\BITS.sddl'
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\BITS\Security>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\BITS\Performance>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\BITS\Parameters>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\BITS>

SetACL finished successfully.
INFO: The restore action ignores the object name parameter (paths are read from the backup file). However, other actions that require the object name may be combined with -restore.
INFORMATION: Input file for restore operation opened: '.\Win7\iphlpsvc.sddl'
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\iphlpsvc\Teredo>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\iphlpsvc\Parameters\Teredo\{FA88062C-9A61-4C1E-AC45-7143F8F01AAD}>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\iphlpsvc\Parameters\Teredo>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\iphlpsvc\Parameters\Isatap\{8AD2FB26-F91E-44F1-9B24-3C0AE56C9CE0}>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\iphlpsvc\Parameters\Isatap>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\iphlpsvc\Parameters\IPHTTPS>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\iphlpsvc\Parameters>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\iphlpsvc\Interfaces>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\iphlpsvc\config>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\iphlpsvc>

SetACL finished successfully.
INFO: The restore action ignores the object name parameter (paths are read from the backup file). However, other actions that require the object name may be combined with -restore.
INFORMATION: Input file for restore operation opened: '.\Win7\MpsSvc.sddl'
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\MpsSvc\Security>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\MpsSvc\Parameters\PortKeywords\Teredo>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\MpsSvc\Parameters\PortKeywords\RPC-EPMap>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\MpsSvc\Parameters\PortKeywords\IPTLSOut>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\MpsSvc\Parameters\PortKeywords\IPTLSIn>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\MpsSvc\Parameters\PortKeywords\DHCP>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\MpsSvc\Parameters\PortKeywords>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\MpsSvc\Parameters>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\MpsSvc>

SetACL finished successfully.
INFO: The restore action ignores the object name parameter (paths are read from the backup file). However, other actions that require the object name may be combined with -restore.
INFORMATION: Input file for restore operation opened: '.\Win7\SharedAccess.sddl'
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Parameters\FirewallPolicy\StandardProfile\Logging>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Parameters\FirewallPolicy\StandardProfile\GloballyOpenPorts>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Parameters\FirewallPolicy\StandardProfile\AuthorizedApplications>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Parameters\FirewallPolicy\StandardProfile>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Parameters\FirewallPolicy\RestrictedServices\Static\System>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Parameters\FirewallPolicy\RestrictedServices\Static>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Parameters\FirewallPolicy\RestrictedServices\Configurable\System>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Parameters\FirewallPolicy\RestrictedServices\Configurable>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Parameters\FirewallPolicy\RestrictedServices>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Parameters\FirewallPolicy\PublicProfile\Logging>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Parameters\FirewallPolicy\PublicProfile\GloballyOpenPorts>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Parameters\FirewallPolicy\PublicProfile\AuthorizedApplications>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Parameters\FirewallPolicy\PublicProfile>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Parameters\FirewallPolicy\FirewallRules>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Parameters\FirewallPolicy\DomainProfile\Logging>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Parameters\FirewallPolicy\DomainProfile\GloballyOpenPorts>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Parameters\FirewallPolicy\DomainProfile\AuthorizedApplications>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Parameters\FirewallPolicy\DomainProfile>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Parameters\FirewallPolicy>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Parameters>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Epoch2>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Epoch>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Defaults\FirewallPolicy\StandardProfile\Logging>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Defaults\FirewallPolicy\StandardProfile>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Defaults\FirewallPolicy\PublicProfile\Logging>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Defaults\FirewallPolicy\PublicProfile>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Defaults\FirewallPolicy\FirewallRules>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Defaults\FirewallPolicy\DomainProfile\Logging>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Defaults\FirewallPolicy\DomainProfile>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Defaults\FirewallPolicy>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Defaults>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess>

SetACL finished successfully.
INFO: The restore action ignores the object name parameter (paths are read from the backup file). However, other actions that require the object name may be combined with -restore.
INFORMATION: Input file for restore operation opened: '.\Win7\WinDefend.sddl'
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\WinDefend\TriggerInfo\0>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\WinDefend\TriggerInfo>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\WinDefend\Security>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\WinDefend\Parameters>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\WinDefend>

SetACL finished successfully.
INFO: The restore action ignores the object name parameter (paths are read from the backup file). However, other actions that require the object name may be combined with -restore.
INFORMATION: Input file for restore operation opened: '.\Win7\wscsvc.sddl'
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\wscsvc\Security>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\wscsvc\Parameters>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\wscsvc>

SetACL finished successfully.
INFO: The restore action ignores the object name parameter (paths are read from the backup file). However, other actions that require the object name may be combined with -restore.
INFORMATION: Input file for restore operation opened: '.\Win7\wuauserv.sddl'
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\wuauserv\Security>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\wuauserv\Parameters>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\wuauserv>

SetACL finished successfully.
13:21:25 - Services Repair Complete.
13:21:27 - Reboot Initiated
Log Opened: 2013-01-05 @ 13:25:01
13:25:01 - -----------------
13:25:01 - | Begin Logging |
13:25:01 - -----------------
13:25:01 - Fix started on a WIN_7 X64 computer
13:25:01 - Prep in progress. Please Wait.
13:25:05 - Prep complete
13:25:05 - Repairing Services Now. Please wait...
INFO: The restore action ignores the object name parameter (paths are read from the backup file). However, other actions that require the object name may be combined with -restore.
INFORMATION: Input file for restore operation opened: '.\Win7\BFE.sddl'
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\BFE\Parameters\Policy\Persistent\SubLayer>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\BFE\Parameters\Policy\Persistent\Provider>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\BFE\Parameters\Policy\Persistent\Filter>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\BFE\Parameters\Policy\Persistent>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\BFE\Parameters\Policy\BootTime\Filter>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\BFE\Parameters\Policy\BootTime>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\BFE\Parameters\Policy>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\BFE\Parameters>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\BFE>

SetACL finished successfully.
INFO: The restore action ignores the object name parameter (paths are read from the backup file). However, other actions that require the object name may be combined with -restore.
INFORMATION: Input file for restore operation opened: '.\Win7\BITS.sddl'
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\BITS\Security>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\BITS\Performance>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\BITS\Parameters>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\BITS>

SetACL finished successfully.
INFO: The restore action ignores the object name parameter (paths are read from the backup file). However, other actions that require the object name may be combined with -restore.
INFORMATION: Input file for restore operation opened: '.\Win7\iphlpsvc.sddl'
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\iphlpsvc\Teredo>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\iphlpsvc\Parameters\Teredo\{FA88062C-9A61-4C1E-AC45-7143F8F01AAD}>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\iphlpsvc\Parameters\Teredo>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\iphlpsvc\Parameters\Isatap\{8AD2FB26-F91E-44F1-9B24-3C0AE56C9CE0}>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\iphlpsvc\Parameters\Isatap>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\iphlpsvc\Parameters\IPHTTPS>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\iphlpsvc\Parameters>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\iphlpsvc\Interfaces>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\iphlpsvc\config>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\iphlpsvc>

SetACL finished successfully.
INFO: The restore action ignores the object name parameter (paths are read from the backup file). However, other actions that require the object name may be combined with -restore.
INFORMATION: Input file for restore operation opened: '.\Win7\MpsSvc.sddl'
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\MpsSvc\Security>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\MpsSvc\Parameters\PortKeywords\Teredo>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\MpsSvc\Parameters\PortKeywords\RPC-EPMap>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\MpsSvc\Parameters\PortKeywords\IPTLSOut>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\MpsSvc\Parameters\PortKeywords\IPTLSIn>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\MpsSvc\Parameters\PortKeywords\DHCP>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\MpsSvc\Parameters\PortKeywords>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\MpsSvc\Parameters>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\MpsSvc>

SetACL finished successfully.
INFO: The restore action ignores the object name parameter (paths are read from the backup file). However, other actions that require the object name may be combined with -restore.
INFORMATION: Input file for restore operation opened: '.\Win7\SharedAccess.sddl'
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Parameters\FirewallPolicy\StandardProfile\Logging>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Parameters\FirewallPolicy\StandardProfile\GloballyOpenPorts>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Parameters\FirewallPolicy\StandardProfile\AuthorizedApplications>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Parameters\FirewallPolicy\StandardProfile>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Parameters\FirewallPolicy\RestrictedServices\Static\System>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Parameters\FirewallPolicy\RestrictedServices\Static>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Parameters\FirewallPolicy\RestrictedServices\Configurable\System>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Parameters\FirewallPolicy\RestrictedServices\Configurable>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Parameters\FirewallPolicy\RestrictedServices>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Parameters\FirewallPolicy\PublicProfile\Logging>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Parameters\FirewallPolicy\PublicProfile\GloballyOpenPorts>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Parameters\FirewallPolicy\PublicProfile\AuthorizedApplications>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Parameters\FirewallPolicy\PublicProfile>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Parameters\FirewallPolicy\FirewallRules>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Parameters\FirewallPolicy\DomainProfile\Logging>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Parameters\FirewallPolicy\DomainProfile\GloballyOpenPorts>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Parameters\FirewallPolicy\DomainProfile\AuthorizedApplications>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Parameters\FirewallPolicy\DomainProfile>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Parameters\FirewallPolicy>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Parameters>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Epoch2>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Epoch>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Defaults\FirewallPolicy\StandardProfile\Logging>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Defaults\FirewallPolicy\StandardProfile>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Defaults\FirewallPolicy\PublicProfile\Logging>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Defaults\FirewallPolicy\PublicProfile>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Defaults\FirewallPolicy\FirewallRules>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Defaults\FirewallPolicy\DomainProfile\Logging>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Defaults\FirewallPolicy\DomainProfile>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Defaults\FirewallPolicy>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess\Defaults>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\SharedAccess>

SetACL finished successfully.
INFO: The restore action ignores the object name parameter (paths are read from the backup file). However, other actions that require the object name may be combined with -restore.
INFORMATION: Input file for restore operation opened: '.\Win7\WinDefend.sddl'
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\WinDefend\TriggerInfo\0>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\WinDefend\TriggerInfo>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\WinDefend\Security>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\WinDefend\Parameters>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\WinDefend>

SetACL finished successfully.
INFO: The restore action ignores the object name parameter (paths are read from the backup file). However, other actions that require the object name may be combined with -restore.
INFORMATION: Input file for restore operation opened: '.\Win7\wscsvc.sddl'
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\wscsvc\Security>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\wscsvc\Parameters>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\wscsvc>

SetACL finished successfully.
INFO: The restore action ignores the object name parameter (paths are read from the backup file). However, other actions that require the object name may be combined with -restore.
INFORMATION: Input file for restore operation opened: '.\Win7\wuauserv.sddl'
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\wuauserv\Security>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\wuauserv\Parameters>
INFORMATION: Restoring SD of: <machine\System\CurrentControlset\Services\wuauserv>

SetACL finished successfully.
13:25:06 - Services Repair Complete.
13:25:07 - Reboot Initiated

zabalenou složku získej.rar přikládám, přiložil jsem tam ještě jeden scrrenshot ze správy disků, jak je mám nastaveny
získej.rar
získej.rar
(301.97 KiB) Staženo 37 x
EDIT: znovu vyzkoušeno odinstalování ESET smart security, v průběhu odinstalace net kupodivu naskošil, ale po restartu po odinstalaci opět nešel

zoldak21
Návštěvník
Návštěvník
Příspěvky: 42
Registrován: 16 Lis 2012 18:34

Re: Po zapnutí PC nejde net - log z combofixu

#49 Příspěvek od zoldak21 »

Nešlo, takže mám dva, teď nevím, jestli ten třetí byl překlep, nebo jsem nepochopil, co dalšího :)
EDIT: tak příloha smazána, koukal jsem už dvakrát stáhnuto :) tak to jedno snad byl ten správný člověk :)

zoldak21
Návštěvník
Návštěvník
Příspěvky: 42
Registrován: 16 Lis 2012 18:34

Re: Po zapnutí PC nejde net - log z combofixu

#50 Příspěvek od zoldak21 »

Co jsem zkoušel, v nouzovém režimu net naběhl normálně, ale dyžtak to sem tam ještě zkusím.
Bylo to zapnuté, vypnul jsem to.

zoldak21
Návštěvník
Návštěvník
Příspěvky: 42
Registrován: 16 Lis 2012 18:34

Re: Po zapnutí PC nejde net - log z combofixu

#51 Příspěvek od zoldak21 »

budu, teď jsem musel zapnout něco kvůli škole, ale pak sem tam zkusím nouzový
Nejde ani jedno. Tady screen, když jsem už dřív zkoušel tracert: http://www.2i.cz/a57dc1eb38 . A jde čistě o internet. Když si něco hodím na noťasu do sdílené složky, z PC se přes wifi-router normálně připojím a stáhnu si to do PC. Takže signál v síti jde, jen ten internet ne.

zoldak21
Návštěvník
Návštěvník
Příspěvky: 42
Registrován: 16 Lis 2012 18:34

Re: Po zapnutí PC nejde net - log z combofixu

#52 Příspěvek od zoldak21 »

v nastavení routeru je 255.255.255.0
Toredo vypnuto
hh :)

zoldak21
Návštěvník
Návštěvník
Příspěvky: 42
Registrován: 16 Lis 2012 18:34

Re: Po zapnutí PC nejde net - log z combofixu

#53 Příspěvek od zoldak21 »

Teď jsem restartoval a net nešel :(

zoldak21
Návštěvník
Návštěvník
Příspěvky: 42
Registrován: 16 Lis 2012 18:34

Re: Po zapnutí PC nejde net - log z combofixu

#54 Příspěvek od zoldak21 »

Tak provedeno a výsledek:
Po restartu automatická instalace ovladače a net v průběhu instalace šel, restart a net nešel, tak jsem nepouštěl nic, ale nainstaloval nejnovější ovladač a opět v průběhu instalace naskočil net.
Tak jsem restartoval a net nešel, zkusil jsem hned restart a spuštění v nouzáku se sítí a net v pohodě šel, takže restart a naběhnutí v normál režimu a net zase nešel.

zoldak21
Návštěvník
Návštěvník
Příspěvky: 42
Registrován: 16 Lis 2012 18:34

Re: Po zapnutí PC nejde net - log z combofixu

#55 Příspěvek od zoldak21 »

Tak teď ještě s kámošem vyzkoušeno v MSCONFIG vše (krom věcí od microsoftu) vypnout a net naskočil dvakrát po sobě v pohodě, pak jsme zapli jen nějaké věci a restart a zase naskočil.
Přikládám screeny, jak to mám teď a zatím naběhlo, ještě zkusím dnes restart, jestli to pořád půjde.
http://www.2i.cz/60d894be6d a http://www.2i.cz/71c985af7c

zoldak21
Návštěvník
Návštěvník
Příspěvky: 42
Registrován: 16 Lis 2012 18:34

Re: Po zapnutí PC nejde net - log z combofixu

#56 Příspěvek od zoldak21 »

Ok, budu čekat, jak půjde teď net a budu informovat. Když by zase někdy nešel, použiji ten návod zde.

zoldak21
Návštěvník
Návštěvník
Příspěvky: 42
Registrován: 16 Lis 2012 18:34

Re: Po zapnutí PC nejde net - log z combofixu

#57 Příspěvek od zoldak21 »

Zatím net vždy naběhl.

zoldak21
Návštěvník
Návštěvník
Příspěvky: 42
Registrován: 16 Lis 2012 18:34

Re: Po zapnutí PC nejde net - log z combofixu

#58 Příspěvek od zoldak21 »

JJ, zkusím to, dyžtak mohu zkusit zapnout jen ten teď a uvidím, jestli to bude dělat :)

zoldak21
Návštěvník
Návštěvník
Příspěvky: 42
Registrován: 16 Lis 2012 18:34

Re: Po zapnutí PC nejde net - log z combofixu

#59 Příspěvek od zoldak21 »

Tak jsem to zkusil hned. Zapl jsem navíc to jediné, co jsem tam měl od Apple v msconfigu, nějaké to ##Id_String ...... ( http://www.2i.cz/60d894be6d ) a restaroval a net nešel, vypl jsem to a znovu restartoval a net šel.
Tak by to mohlo být ono. Tak jen laický dotaz:
co to vlastně je? Jak nebo s čím se to dostalo do PC a jak se to dá případně smazat/odinstalovat?

zoldak21
Návštěvník
Návštěvník
Příspěvky: 42
Registrován: 16 Lis 2012 18:34

Re: Po zapnutí PC nejde net - log z combofixu

#60 Příspěvek od zoldak21 »

Nevím proč, ale když to zadám a spustím, chvíli běží OTL v pohodě, pak se vedle názvu programu objeví "neodpovídá" a nic :(
Přitom jednou už jsem ho tady v tom vláknu používal a v pohodě. Pozaškrtané atd bychto měl mít dobře snad.

Zamčeno